Surface roughness testers SRT-6200/6210
Brief Introductions:
It is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
Instrument Features:
|
◇ Multiple parameter measurement: Ra, Rz, Rq, Rt ◇ Highly sophisticated inductance sensor ◇ Four wave filtering methods : RC, PC-RC, GAUSS and D-P ◇ Built-in lithium ion rechargeable battery and control circuit with high capacity ◇ Small in size, light in weight and easy to use ◇ Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface. |
◇ Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.
◇ The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.; Metric / Imperial Conversion. ( SRT-6210 )
Surface roughness testers SRT-6200/6210Technical Specifications
Technical Specifications:
|
Model |
SRT-6200 |
SRT-6210 |
|
Display |
4 digits, 10 mm LCD, with blue backlight | |
|
Parameters |
Ra, Rz |
Ra, Rz, Rq, Rt |
|
Measuring Range |
Ra, Rq: 0.005-10.00um / 1.00-400.0uinch |
Ra,Rq: 0.005-16.00um / 0.020-629.9uinch |
|
Rz, Rt: 0.020-100.0um / 0.078-4000uinch |
Rz,Rt: 0.020-160.0um / 0.078-6299uinch | |
|
Accuracy |
Not more than 10%; Fluctuation of display value: Not more than 6% | |
|
Test Principle |
Inductance type | |
|
Radius of Probe Pin |
5um | |
|
Material of Probe Pin |
Diamond | |
|
Dynamo-measurement of Probe |
16mN(1.6gf) |
4mN(0.4gf) |
|
Probe Angle |
90 | |
|
Vertical Radius of Guiding Head |
48mm | |
|
Maximum driving stroke |
17.5mm/0.7inch | |
|
Cutoff length (l) |
0.25mm / 0.8mm / 2.5mm optional | |
|
Evaluation length |
1--5cut off optional | |
|
Driving speed |
| |
|
Profile digital filter |
| |
|
Power Li-ion battery |
rechargeable | |
|
Operating conditions |
Temperature: 0~50℃; Humidity <80% | |
|
Dimension & Net weight |
140x57x48 mm (5.5x2.2x1.9 inch) & about 420 g | |